• carrylex@lemmy.world
    link
    fedilink
    English
    arrow-up
    18
    arrow-down
    1
    ·
    19 hours ago

    Desoldering RAM off a production PCB is something no hobbyist is going to bother with

    Ever heard of “repair” when no original spare parts are available?

    • buddascrayon@lemmy.world
      link
      fedilink
      English
      arrow-up
      11
      arrow-down
      2
      ·
      19 hours ago

      According to the article you can still do this. It’s just you can’t replace a 2 GB with an 8 GB because the board will still only recognize 2GB of that chip.

      This is to prevent the resellers from buying 2 GB boards for cheap, replacing them with cheap 8 GB chips, and then reselling them for just under retail of the official 8 GB boards.

      • Omgpwnies@lemmy.world
        link
        fedilink
        English
        arrow-up
        6
        ·
        edit-2
        17 hours ago

        The article also states that you likely can’t use just any compatible chip, the part number is baked into the board, so you might not even be able to swap out a 2GB SK Hynix with a 2GB Samsung chip

        • WhyJiffie@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          4
          ·
          13 hours ago

          it does not say part number is baked in. it says parameters are baked in (latencies, frequency), and so chips with a different part number might not work.